In accordance with our Enterprise Agent support lifecycle policy, ThousandEyes virtual and physical appliances based on Ubuntu 14.04 Trusty Tahr operating system reached their End of Support stage at the end of April 2019. These appliances must be upgraded or otherwise migrated to a currently supported operating system. The ThousandEyes platform stopped accepting data submitted by these Enterprise Agents at the end of June 2019.
To continue using your Trusty-based appliances, one of the following actions is required:
Perform an in-place upgrade: Performing an in-place upgrade is most likely the simplest method of keeping your appliances supported. The main part of this article describes the in-place upgrade process.
Alternatively, migrate the agent: If an in-place upgrade is not the right option for you, you can migrate the agent to one of the other deployment options or other supported operating systems. Consult the Related Information section at the bottom of this article.
In the Cloud & Enterprise Agents > Agent Settings > "Agents" tab section of the web portal, the agents requiring your attention will have a red triangle icon with an exclamation mark inside () visible next to their names, as pointed out with the marker #1 in the following figure:
To get more information, you can either hover your mouse over the red triangle icon (1) and a brief popup (2) will appear, or, alternatively, you can expand the agent list item and observe the version details displayed on the right-hand side panel:
The agents that you are looking for have the following information displayed:
Operating system version information (3) contains
Ubuntu 14.04.x LTS. When relevant, this section's text is displayed in red color, as shown in the figure above.
Agent installation type (4) should be one of the following:
Hyper-V Appliance, or
Cisco Container. Whether the appliance is locked or unlocked should not make a difference, provided that you have not changed the configuration of an unlocked appliance beyond what automatic upgrade process is expecting.
Once you've identified appliances requiring your attention and decided to perform the in-place upgrade, proceed to the next section to find the upgrade instructions.
The following prerequisites need to be met for the appliance to be eligible for the upgrade process described below:
A 64-bit operating system only
Ubuntu 14.04 Trusty Tahr-based appliances only
Enough free disk space (10GB)
Working internet connection (direct or proxied)
Access to Ubuntu and ThousandEyes APT repositories (connectivity requirements are fully described in Firewall Configuration for Enterprise Agents)
Appliance fully updated to the latest ThousandEyes software versions
NOTICE: Enterprise Agent appliance will not be performing tests or communicate with the platform while the upgrade process is taking place.
Once started, the upgrade process runs as follows:
Initial checks are performed, to make sure the environment is suitable for the upgrade
The agent process is stopped, to prevent it from interfering with the upgrade
The operating system upgrade is started (the "pre-reboot" stage)
Once the operating system upgrade completes, the appliance is automatically rebooted
The "post-reboot" part of the upgrade is started (reinstalls the ThousandEyes agent software and starts the services)
Depending on the speed of your internet connection, your ISP's quality of connectivity to the relevant APT repository network, and the CPU and I/O speed of your hardware, the pre-reboot and post-reboot stages can take anywhere from 5 to 30 minutes each.
For virtual appliances, if you have the ability to create a snapshot of a virtual machine, it is highly recommended to do so. This will enable you to instantly revert the appliance to the last known good state if something unexpected happens during the upgrade.
A single command starts the upgrade process:
The start of the output that the upgrade process produces should look something like this:
te-appliance-upgrade: Getting ubuntu release.te-appliance-upgrade: Currently running on trustyte-appliance-upgrade: Installing screen temporarily.te-appliance-upgrade: No lock on apt/dpkg, proceeding....
WARNING: It is important the upgrade process is not interrupted!
As mentioned in the Upgrade process overview section above, the upgrade process can take anywhere between 10-60 minutes. Once the appliance is rebooted to enter the "post-boot" upgrade stage, there will be no explicit feedback on the appliance's screen about the upgrade process still taking place.
However, customers can leverage the following command to verify if the post-boot upgrade process is still running:
ps aux | grep upgrade | grep -v grep
As long as the command above produces any output, the post-boot upgrade process is still running. Example output that is produced when the post-boot upgrade is still ongoing:
root 625 0.0 0.3 22056 3124 ? S 13:49 0:00 /bin/bash /usr/local/te_upgrade/upgrade.shroot 626 0.0 0.1 22052 1948 ? S 13:49 0:00 /bin/bash /usr/local/te_upgrade/upgrade.shroot 627 0.0 0.1 22056 1952 ? S 13:49 0:00 /bin/bash /usr/local/te_upgrade/upgrade.shroot 629 0.0 0.1 25096 1372 ? S 13:49 0:00 logger -s -t te-appliance-upgraderoot 631 0.0 0.1 25096 1372 ? S 13:49 0:00 logger -s -t te-appliance-upgrade
The actions of the upgrade process can be followed with this command:
tail -f /var/log/syslog \/var/log/dpkg.log \/var/log/thousandeyes-upgrade-appliance-apt.log
Relevant content in the
/var/log/syslog file will be prefixed with the
<TIMESTAMP> <HOSTNAME> te-appliance-upgrade: Test agent package downloaded<TIMESTAMP> <HOSTNAME> te-appliance-upgrade: ThousandEyes repositories reachable, proceeding with distribution upgrade<TIMESTAMP> <HOSTNAME> te-appliance-upgrade: Main disk identified and passed to debconf.<TIMESTAMP> <HOSTNAME> te-appliance-upgrade: Checking for a new Ubuntu release
Once the upgrade process has completed successfully, the agent information panel in the web UI will present the following information:
The important details to pay attention to are:
Agent continuously checking in: Once the upgrade is complete, the agent should be checking in with the platform roughly once every minute.
Operating system version updated: The
Ubuntu 16.04.x LTS text should be displayed.
Agent and BrowserBot versions up to date: The upgrade process installs the latest available software versions. This section should not be showing any red text indicating obsolete software versions.
If you encounter any issues while upgrading your appliances, contact the ThousandEyes Customer Engineering team and we'll help you out instantly.
The following resources contain further information: