Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Release Notes: January 2026

2026-01-30

ThousandEyes MCP Server General Availability

The ThousandEyes MCP server is now available for all ThousandEyes customers, allowing you to connect an AI assistant directly to the ThousandEyes platform. The assistant can then use natural language to access and analyze ThousandEyes network monitoring data through a standardized interface.

For more information, see ThousandEyes MCP Server.

2026-01-29

Nutanix AHV Support for Virtual Appliances

We now support installing the ThousandEyes Virtual Appliance agent (TEVA), version 0.258.0 and later, on Nutanix AHV (Acropolis Hypervisor) with Nutanix Prism Central version 7.3 and later, enabling you to deploy Enterprise Agents natively in Nutanix environments.

Deployments through Prism Element (cluster-local management) are not supported.

For instructions on installing a TEVA agent, see ThousandEyes Virtual Appliance Installation.

2026-01-28

ThousandEyes Endpoint Agent: Serial Number Visibility

We’ve made it easier to identify and manage your devices. The Endpoint Agent now displays device Serial Numbers across key workflows—including Agent Settings, Single Agent View, and Views—for streamlined device identification and inventory management.

You can now search for and filter agents by Serial Number in these sections. This information is also available through the Endpoint Agent public APIs, enabling faster, more accurate tracking and troubleshooting of individual devices.

The Serial Number will be visible for agents running on version 2.31.0 or higher.

Updated Heat Map Visualization in Endpoint Agent View

The heat map in Endpoint Agent View now uses a smooth color gradient rather than six fixed colors. This update helps you identify performance changes more easily and provides clearer insight into endpoint experience trends.

2026-01-27

Mobile Endpoint Agent Android Version 1.5.0

The following enhancements have been made to the Mobile Endpoint Agent:

  • Mobile Endpoint Agent now supports TCP Connect for ping tests, providing reliable connectivity checks even when ICMP is blocked.

  • Fixed an issue that caused the app to crash when encountering unknown hosts.

  • The app now checks for network interface availability before use to prevent exceptions.

  • Metrics from endpoints in HTTP Server tests no longer display negative values.

2026-01-26

Alpine Linux End of Support Reminder

Alpine Linux 3.20 is now in the End of Installation Support phase. It will reach End of Support on April 1st, 2026, and End of Life on June 1st, 2026.

ThousandEyes Enterprise Agents deployed as Docker containers or using the Cisco Application Hosting Framework (CAF) based on Alpine Linux 3.20 must be upgraded to the latest Agent image before then to remain functional.

ThousandEyes does not support the native installation of ThousandEyes Enterprise Agents on Alpine Linux.

For more information on upgrading your agent:

Adaptive Alerting Is Now Available for Endpoint Scheduled Tests

We are pleased to announce that Adaptive Alerting is now available for Endpoint scheduled tests. This extends our intelligent alerting capabilities to your endpoint monitoring, helping you reduce alert fatigue and focus on the performance issues that truly impact your remote workforce.

Adaptive Alerting learns what's normal for your users and automatically detects statistically significant deviations based on historical patterns and the scope of an issue.

Key benefits for Endpoint Agent monitoring:

  • Smarter Alerts for a Dynamic Workforce: Adaptive Alerting can intelligently distinguish between minor, isolated fluctuations (like a single user's brief Wi-Fi dip) and widespread, persistent problems that require attention. It also learns to identify consistently problematic devices by giving more weight to issues that reoccur on the same endpoint over time.

  • Drastically Reduced Alert Fatigue: Move beyond rigid "X agents over Y rounds" conditions. By analyzing historical patterns and the statistical probability of an issue, Adaptive Alerting automatically filters out transient noise and insignificant anomalies, ensuring your team is only notified for meaningful performance degradations.

  • Simplified Configuration: Instead of manually defining complex agent and round counts, simply enable adaptive detection and choose a single sensitivity level (High, Medium, or Low). Adaptive Alerting then automatically applies the appropriate probability thresholds to match your monitoring needs.

Adaptive Alerting is now the default method for all new Endpoint Scheduled Test alert rules. You can also update your existing Endpoint Scheduled Test alert rules to use this new, more intelligent detection method.

For more information on how this feature works, see Creating and Editing Alert Rules: Adaptive Alerting Overview.

2026-01-21

Endpoint Dynamic Tests Metrics in OpenTelemetry

Endpoint dynamic tests metrics are now supported in ThousandEyes for OpenTelemetry. For a complete list of supported data, see ThousandEyes for OpenTelemetry Data Models.

2026-01-19

Endpoint Agent Client Version 2.31.0

The following enhancements have been made to the Endpoint Agent client:

All Platforms

  • The agent’s gateway detection logic has been enhanced to more reliably identify gateway connections when a VPN is active. This update ensures local network and gateway metrics are visible, even if VPN clients modify or obscure standard network routes.

  • The agent now reports the machine’s serial number, when available, on supported platforms. This improvement provides more accurate device identification and simplifies asset management for administrators.

  • Previously, the agent only recognized TCP rules and did not consider the protocol when matching VPN bypass rules. This issue has been fixed. The agent now correctly evaluates forwarding rules by protocol for dynamic tests, ensuring VPN bypass rules are handled accurately.

  • The agent no longer supports Cisco ZTA versions earlier than 5.1.7. Upgrade to version 5.1.7 or later to continue receiving updates and support.

Windows

  • The default NPCAP library distributed with the installer is version 1.86.

2026-01-16

Ashburn Webex Cloud Agent Decommission Notice

Due to changes in the Webex infrastructure, the Ashburn Webex Cloud Agent will be decommissioned in 30 days. Any agent-to-agent tests or RTP tests that use this Cloud Agent as the target agent will encounter errors and will be automatically disabled after February 16th, 2026.

Other test types will not be affected unless they explicitly reference this agent as a target. You can migrate your tests to one of the following locations:

  • Chicago, IL (Webex Calling)

  • Chicago, IL (Webex Meetings)

  • Dallas, TX (Webex Calling)

  • Dallas, TX (Webex Meetings)

  • Montreal, Canada (Webex Meetings)

  • New York, NY (Webex Meetings)

  • San Jose, CA (Webex Meetings)

  • Toronto, Canada (Webex Calling)

  • Toronto, Canada (Webex Meetings)

  • Vancouver, Canada (Webex Calling)

We recommend updating your configurations before the decommission date to avoid service interruptions. If you need assistance updating your tests, contact ThousandEyes Support.

Upcoming Change to Path Visualization View

To simplify the Path Visualization interface and focus our efforts on its core diagnostic features, we will be removing the temporary drag-and-drop functionality for reordering nodes.

Key details:

  • What's Changing: The ability to temporarily rearrange nodes by dragging them will be removed.

  • Why We're Making This Change: This allows us to streamline the user experience and dedicate development to enhancing the core analytical capabilities of Path Visualization.

  • When It Will Happen: This change will take effect after February 2, 2026.

This update only affects the temporary visual ordering of nodes; all test data and path analysis features will continue to function as they do today.

2026-01-07

Required Upgrade for all Docker-Based Enterprise Agents

Recent runc security fixes introduced a regression. runc has fixed this issue, and we now require all customers using Docker-based Enterprise Agents to upgrade runc, either directly to version 1.3.4 or later, or by upgrading docker-ce.

If you are on SUSE (SLES), you will need to upgrade to runc version 1.4.0 or later. This is because the Docker package shipped in SUSE (SLES) is from the SUSE repository and not from Docker Inc.

You may also need to update your seccomp profiles and redeploy the Enterprise Agent container if you are on the wrong profile. See the recommended steps below to confirm whether you need to update the seccomp profile.

Recommended Steps

Confirm whether the seccomp profiles need to be updated:

If the command returns nothing, then the correct profile is currently active, and you can ignore the steps marked as Optional below.

If you want to upgrade runc directly:

  1. Download the correct binary from their release pages, under assets: runc Releases.

  2. Use the which runc command to identify where the existing runc binary is located.

  3. Replace the runc binary in your filesystem with the newly downloaded binary.

  4. Optional: Update the seccomp profile and re-deploy the Enterprise Agent container if required. For instructions, see Redeploying Docker-Based Enterprise Agents for runc Security Fixes.

If you want to upgrade docker-ce:

  1. Upgrade docker-ce, to ensure runc is the latest version (at least v1.3.4).

  2. Verify the runc version using docker info and runc --version.

  3. Optional: Update the seccomp profile and re-deploy the Enterprise Agent container if required. For instructions, see Redeploying Docker-Based Enterprise Agents for runc Security Fixes.

Once you have upgraded runc either directly or through docker-ce upgrade, verify runc version after the upgrade via runc --version or docker info commands.

Last updated